Cleaning, Sanitizing and Hygiene Systems


Adjusting the Float Valve
1. Hold the float valve up underneath the water dispensing area.

2. Loosen the screw and let the float fall to the bottom of the tank, then re-tighten the screw

3. After tightening, raise the float valve to about an inch from the spill over weir.


Note: Extract from Monthly Maintenance Procedure in the supplied Instruction Manual.

“Inspect the float tank. The float valve should open as the water level drops and before the float bottoms out in the tank. The float valve should close before the water level fills to the overflow rim. Adjust the float arm at the valve to insure operation as described.” << back

International Distributor Link

Westhills Lodge, Washpool Lane, Lydiard Millicent, Swindon, Wiltshire, SN5 5PP, UK | Registered in the UK: 3445536